Automatic Ultrafiltration Membrane System UF Water Treatment 1000LPH
Ultrafiltration Membrane System Description
Ultrafiltration membrane is the anisomerous semipermeable membrane made of macro molecule material as theseparationmethod without phase transition for solution, and can remove particles whose molecule weight ranges 1,500-100,000 Dalton,and can effectively remove organic,bacterium,virus,colloid and non-ion suspended solid.
Ultrafiltration is a separation technique widely used.Mainly the use of polysulfone, microporous polyethersulfone
ultrafiltration membranes (molecular weight cut thousands of ten thousands daltons) filter out impurities in the water
can be removed more than 98% organic matter, to ensure that the treated water is less than 1 SDI, the SDI value, the
turbidity is very satisfactory.The pretreatment facilities are exempt large, does not need the coagulant, flocculation, comply
with environmental requirements.
Ultrafiltration Membrane System Advantages and disadvantages
| ► Ultrafiltration membrane components use the world famous membrane company products, to ensure that customers get the world's best quality organic membrane components, to ensure the retention performance and membrane flux, ultrafiltration equipment control system can be personalized according to the user's specific requirements. Combined with advanced control software, on-line online centralized monitoring of important process operating parameters, to avoid manual misoperation, multi-directional to ensure long-term stable operation of the system. |
| ► Since each ultrafiltration unit is added with a protective liquid before leaving the factory, thoroughly rinse the protective liquid in the assembly before use. Rinse with low pressure (0.1 MPa) for 1 hour, then rinse with high pressure (0.2 MPa) for 1 hour. When the low pressure or high pressure flushing, the system's production water discharge valve should be fully open. When using water, check and confirm that the product water does not contain any fungicide. |
| ► The ultrafiltration equipment system has a high recovery rate, and the obtained product has excellent quality, and can realize efficient separation, purification and high-concentration of materials. The system is made of sanitary grade pipe valves, which are clean and hygienic on site, meeting the requirements of GMP or FDA production regulations. The system has advanced technology design, high degree of integration, compact structure, small floor space, easy operation and maintenance, and low labor intensity. |
| ► The process has no phase change, has no adverse effects on the constituents of the material, and is always in a normal temperature state during separation, purification and concentration, and is particularly suitable for the treatment of heat sensitive substances, completely avoiding the disadvantage of high temperature on the destruction of biologically active substances. Effectively retain bioactive substances and nutrients in the original material system. |
| ► The ultrafiltration unit should be handled with care and attention. Since the ultrafiltration unit is a precision equipment, be careful when using it, and take it lightly and gently. If the components are deactivated, rinse them with clean water, add 0.5% formaldehyde solution for disinfection, and seal them. If the winter components are still antifreeze, the components may be scrapped. |
| ► The ultrafiltration equipment system has low energy consumption and short production cycle. Compared with the traditional process equipment, the equipment operation cost is low, which can effectively reduce the production cost and improve the economic benefits of the enterprise. |
| ► The advantages of ultrafiltration technology are simple operation, low cost, no need to add any chemical reagents, especially the ultra-filtration technology has mild experimental conditions, no phase change compared with evaporation and freeze-drying, and does not cause temperature and pH changes. Thus, denaturation, inactivation and autolysis of biomacromolecules can be prevented. In the preparation technology of biological macromolecules, ultrafiltration is mainly used for desalting, dehydration and concentration of biological macromolecules. The ultrafiltration method also has certain limitations, and it cannot directly obtain a dry powder preparation. For protein solutions, generally only 10 to 50% concentration is obtained. |
Ultrafiltration Membrane System Details
Ultrafiltration Membrane System Application
1. Dairy, Fruit Juice, Vegetable Juice And Other Clear, Concentrated.
2. Animals And Plants (Aloe Vera, Mangosteen, Tea, Etc.) Effective Ingredients Extraction.
3. Soybean Protein, Oligosaccharides, Isoflavones And Other Extraction, Concentration.
4. Antibiotics, Amino Acids, Vc And Other Fermentation Broth Purification, Concentration.
5. Chinese Medicine (Bupleurum, Salvia, Scutellaria, Etc.) Injection Of Active Ingredients Purification, Separation.
6. Polysaccharides (Ganoderma Lucidum, Grifola Frondosa, Mushrooms, Etc.) Material Purification, Concentration.
7. Fluorescent Whitening Agent Desalination, Concentration.
8. Electrophore Paint Recovery And Water Reuse.
9. Pva Of Textile Desizing Wastewater Reuse.
Ultrafiltration Membrane System Optional Components
Ozone Generator
Regulating wheels
Dosing system
Automatic cleaning system
PE,stainless steel or FRP water tank
Thank you so much for your value time.Any questions please click "contact now" send us inquiry !We will reply you within 24 hours.
Product Tags:
|
|
Automatic Ultrafiltration Membrane System UF Water Treatment 1000LPH Images
|
